Menopause And Sudden Gush Of Blood

SIMPLE.

READ WELL BEFORE START.

MATERIAL USED FOR THE ANGEL THAT SIMPLE.

This is a list of all known materials and are almost always used:

- Scissors, needle, pins, thread to machine, thimble, fill, coarse linen thread, stuffing.
This is another list of tools.
- A fine hook, a soft pencil or pen with water, a needle wool, a long thin screwdriver, acrylic paints in black and white, red pencil.
Fabrics:
- Solid color patch meat and a piece of canvas paintings.

Note: The Angel Easy is smaller, is 90% of the original.


BEGIN:


1 - With a soft pencil or pen to copy the outline of the water pattern on a layer of fabric. It copies only the outline. The opening to turn the piece is located across the base, remember that this part does not sew. Nor is sewn openings to put the arms on both sides. We cut the pattern to give the neck a little taller and not pull the piece by that party to give back.



2 - Next must copy the outline and facial features in another layer of fabric. We recommend using a marker of water for this operation.



3 - We'll match the two pieces that just drew., Pay attention to that part of the head to match very well. When you are done with pins to make sure it does not move and put the padding back to the sandwich.



4 - Before we can remove the pins to baste it is easier to sew the machining contour. We have placed the pickets to be given after cutting the outline right in the neck (see photo).

5 - This will be the angel's body once it has cut the margin, the extra padding and pickets have been involved.

6 - The arms and feet "Angel Easy" are made with sticks and then glued with hot glue to attach them to the web, but we thought that the doll would be more elegant with cloth arms and legs (ie leave it to your choice).
arms and legs are exactly like the tail of the first figure you have done: the strawberry.
Cut a long strip of flesh-colored solid of about 2.5 -3 cm wide by 25-30 cm long and is divided into 4 pieces more or less equal. In the line that forms a semicircle Do the division as shown in the photo and then coséis machine along the lines you have painted. Bias tape tour is necessary to turn the tube so narrow.


7 - These are the arms and legs cut off and flipped once, the next step is to fill them with a screwdriver, very little, without going to the landfill on the edge and getting very little filler in time.

These are the arms once filled.


8 - This is the doll with arms and legs. The legs have to position them at the base of the trunk, basting the fabric to fix them later one stitched by machine.
arms get into the holes in the body that have been without stitches and fastened with hand-made stitches.

9 - With a triple-0 and brush with white acrylic paint eyeballs, with the same brush red painted mouth. Let dry.


... then paint the iris y. ..


... the upper eyelid. The white dot will light in the eye.

10 - Now with taupe DMC thread and using a work out your nose. If you can not remember how to sew check the entry "An Angel Face."
remember to clean the pen with water and allow to dry the fabric before applying blush.


11 - To end the face apply blush.


12 - copy the outline of the pattern dressed in a gingham plaid fabric or similar. Copies of two layers of fabric and leave an opening in the part that corresponds to the neck. We have made the opening a little larger than the original, as seen in the photo.

13 - This is the dress ready to flip, with pickets made the armholes and the mouth-sleeve, low neck without sewing.


14 - Dress flipped and three red beads sewn on the front. Between the second and third beads more space because they will have to put a belt.

15 - Once dressed the doll will make a small stitch on the cuffs, pull the yarn to knit and topped the thread.


16 - The angel dress will be closed in all its base by a small stitch. Stick a little padding before sewing the bottom to the dress is a bit inflated. By giving the stitching catch the under clothing and legs simultaneously.


The base of the dress will be closed as shown in the photo.


17 - To make the wings we used the cardboard from a box of Christmas cakes and the pattern we have used to make the Christmas Angel.

18 - It copies the shape of the wing pattern of the carton upside down and mark the two center holes.

19 - Trim just the pencil line and drill the two holes with a needle wool.

20 - The wings are attached to the angel's back by a few stitches in the holes made earlier. Top well.



21 - Finally the hair is tied in the points indicated with a marker of water. The angel has long hair.


The original figure has a artificial pine branches subject to the waist loop, we have opted for a natural branches to take the picture.