Naruto Sprites Shippuden

A SHEEP.

READ WELL BEFORE.

material for use in sheep.

This is a list of all known materials and are almost always used:
- Scissors, needle, pins, thread to machine, thimble, filling.
This is another list of tools.
- A fine hook, a soft pencil or pen of water, a long thin screwdriver, two black beads.
Fabrics:
- Felt in black and cream.

Note: The sheep is 80% of the original.


BEGIN:

1 - Place the body pattern of the sheep on top of two layers of felt raw. We have had him with coffee to make it a bit more rustic.
Copy the outline of the pattern with a water pen or pencil.
remember to mark the points of reference for the opening. These points will be located in the belly of the sheep (see photo).
pickets there to make the point out later.

2 - For the wick does not move while sewing, basting around the sewing line and stitch machine with the same line. No sew:
1 - The hollow of the neck.
2 - The hollow legs.
3 - The opening in the abdomen.

3 - This piece will be sewn and finished. Pickets to be carried out are marked with blue marker will be placed: in the neck by the side of the back under the tail and legs on the side of the belly.

4 - After turning the piece, using the opening is filled we have done in the womb.

5 - Now work in the head. Copy the pattern to two layers of fabric and cut two ears.
For this operation we use a clear pencil. The only squad that we will be located under the snout (see photo).

6 - The head is a bit tacked and sewn by machine using a small stitch. Then trimmed, leaving about 3 mm margin and performs the corresponding picket. He turns and filled a little. Leave the filler neck free.

7 - When its head is done, the ears are sewn.

8 - One on each side of the face. You can also sew two black beads for eyes.

9 - the head is inserted into the body by the side of the neck and given a few stitches around it to make it secure.

10 - Now we close the opening of the womb with a hidden stitch.

11 - also have to make two legs. The original is in the book has legs of wood, but we have preferred to make them with black felt.
The pattern is very easy to do. We put it in the grid so that you bring forth the proportions. To
legs using the same process as usual, ie the pattern copiáis twice and in two layers of black felt for ......, then machine stitch

turning them with bias tape and the rotating


fill slightly.

12 - Finally get into the two holes that have been unlocked in the body and are secured by either a small stitch.